Tube
Typical Uses for C27200 Yellow Brass "63.5%"
- Fasteners: Fasteners, Fasteners
- Industrial: Cold Headed Parts, Heat Exchanger Shells, Pump Cylinder Liners
Product Specifications
| End Product | Specification |
| Bar | ASTM B36 |
| Plate | ASTM B36 |
| Sheet | ASTM B36 |
| Strip | ASTM B36 |
| Tube | ASTM B135 |
Chemical Composition
| Cu | Fe | Pb | Zn | |
| Min/Max | 62.0 - 65.0 | .07 | .07 | Rem |
| Nominals | 63.5 | - | - | 36.5 |
Mechanical Properties
| Temper | Sect. Size | Cold Work | Type Min | Temp | Tensile Strength | YS 0.05% UL |
YS 0.02% Offset |
YS 0.005% Offset |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Shear Strgth |
Fatigue Strgth |
Izod Impact Strgth |
| - | in. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| Tube | |||||||||||||||||||
| H80 | 0.065 | 0 | TYP | 68 | 74 | 55 | - | - | 10 | - | - | 80 | - | - | - | - | - | - | 0.0 |
| 1.65 | 20 | 510 | 379 | - | - | 10 | - | - | 80 | - | - | - | - | - | - | 0.0 | |||
| OS025 | 0.065 | 0 | TYP | 68 | 56 | 23 | - | - | 50 | - | - | 82 | - | - | - | - | - | - | 0.0 |
| 1.65 | 20 | 386 | 159 | - | - | 50 | - | - | 82 | - | - | - | - | - | - | 0.0 |
Physical Properties
| Product Property | US Customary | Metric |
| Melting Point - Liquidus | 1680 F | 916 C |
| Density | 0.305 lb/in3 at 68 F | 8.44 gm/cm3 @ 20 C |
| Specific Gravity | 8.440 | 8.44 |
| Electrical Conductivity | 27.60 %IACS @ 68 F | 0.161 MegaSiemens/cm @ 20 C |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2̴ · oF)at 68F | 116.0 W/m · oK at 20 C |
| Coefficient of Thermal Expansion | 11.40 · 10-6 per oF (68-572 F) | 20.5 · 10-6 per oC (20-300 C) |
| Specific Heat Capacity | 0.090 Btu/lb/oF at 68 F | 377.1 J/kg · oK at 293 K |
| Modulas of Elasticity in Tension | 15000 ksi | 103400 MPa |
| Modulus of Rigidity | 5600 ksi | 38610 MPa |
Fabrication
No info Available
Our Services
40+ years of experience
Aviva Metals Houston warehouse operation is a AS9120B, and AS9100D in our Ohio foundry, based on ISO 9001:2015. We are now also offering our complete range of brass, bronze and copper alloys in precision machined or milled parts, in full accordance with your drawings. Aviva Metals creates custom precision bearings and bushings, flanges, washers, double flange bearings, full half bearings, spacers and special machined parts that can be shipped on a global basis and in full accordance with most international standards.
