Pipe
Typical Uses for C94300 High Leaded Tin Bronze (Soft Bronze)
- Industrial: High Speed, Light to Medium Pressure Bushings, Railroad Applications, Soft Bushings, High Speed Bearings for Light Loads, Soft Metal Applications
Product Specifications
| End Product | Specification |
| Continuous | ASTM B505, SAE J461, J462 |
| Ingot | ASTM B30 |
| Sand | ASTM B584, B763, SAE J461, J462 |
Chemical Composition
| Min/Max | |||||
| Nominals |
Temper
| Product Type | Temper Type |
| Continuous | ASTM B505, SAE J461, J462 |
| Ingot | ASTM B30 |
| Sand | ASTM B584, B763, SAE J461, J462 |
Mechanical Properties
| Temper | Sect. Size | Cold Work | Type Min | Temp | Tensile Strength | YS 0.05% UL |
YS 0.02% Offset |
YS 0.005% Offset |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Shear Strgth |
Fatigue Strgth |
Izod Impact Strgth |
| - | in. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| As Continous Cast | |||||||||||||||||||
| TF00 | 68 | 75 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | ||||
| TF00 | 0 | SMIN | 20 | 517 | 345 | - | - | 5 | - | - | - | - | - | - | - | - | - | 0 | |
| M07 | 68 | 45 | 20 | - | - | - | - | - | - | - | - | - | - | - | - | ||||
| M07 | 0 | SMIN | 20 | 310 | 138 | - | - | 25 | - | - | - | - | - | - | - | - | - | 0 | |
| As Sand Cast | |||||||||||||||||||
| M01 | 68 | 75 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | ||||
| M01 | 0 | SMIN | 20 | 517 | 345 | - | - | 5 | - | - | - | - | - | - | - | - | - | 0 | |
| M01 | 68 | 45 | 20 | - | - | - | - | - | - | - | - | - | - | - | - | ||||
| M01 | 0 | SMIN | 20 | 310 | 138 | - | - | 25 | - | - | - | - | - | - | - | - | - | 0 | |
| M01 | 68 | 50 | 23 | - | - | - | - | - | - | - | - | - | - | 38 | 14 | 85 | |||
| M01 | 0 | TYP | 20 | 345 | 159 | - | - | 35 | - | - | - | - | - | 85 | - | 262 | 97 | 115 | |
| TF00 | 68 | 85 | 60 | - | - | - | - | - | - | - | - | - | 190 | 65 | 14 | 110 | |||
| TF00 | 0 | TYP | 20 | 586 | 414 | - | - | 10 | - | - | - | - | - | - | 190 | 448 | 97 | 149 |
Physical Properties
| Product Property | US Customary | Metric |
| Coefficient of Thermal Expansion | 10.9 · 10-6 per oF (68-392 F) | 19.6 · 10-6 per oC (20-300 C) |
| Density | 0.32 lb/in3 at 68 F | 8.86 gm/cm3 @ 20 C |
| Electrical Conductivity | 12 %IACS @ 68 F | 0.066 MegaSiemens/cm @ 20 C |
| Melting Point - Liquidus | 1880 F | 1027 C |
| Melting Point - Solidus | 1660 F | 904 C |
| Modulas of Elasticity in Tension | 10500 ksi | 103400 MPa |
| Specific Gravity | 8.86 | 8.86 |
| Specific Heat Capacity | 0.09 Btu/lb/oF at 68 F | 377.1 J/kg · oK at 293 K |
| Thermal Conductivity | 31.2 Btu · ft/(hr · ft2 · oF) at 68F | 54.0 W/m · oK at 20 C |
Fabrication
| Joining Technique | Suitability |
| Brazing | Poor |
| Coated Metal Arc Welding | Not Recommended |
| Gas Shielded Arc Welding | Not Recommended |
| Machinability Rating | 80 |
| Oxyacetylene Welding | Not Recommended |
| Soldering | Good |
Our Services
40+ years of experience
Aviva Metals Houston warehouse operation is a AS9120B, and AS9100D in our Ohio foundry, based on ISO 9001:2015. We are now also offering our complete range of brass, bronze and copper alloys in precision machined or milled parts, in full accordance with your drawings. Aviva Metals creates custom precision bearings and bushings, flanges, washers, double flange bearings, full half bearings, spacers and special machined parts that can be shipped on a global basis and in full accordance with most international standards.
