Typical Uses for C63600 Silicon Aluminum Bronze
- Electrical: Cold Headed Nuts, Cable Connectors, Components for Pole Line Hardware
- Fasteners: Screw Machine Products, Bolts
- Industrial: Valve Components, Nuclear Power Service
Product Specifications
| End Product | Specification |
| Information not available on website |
Chemical Composition
| Al | As | Cu | Fe | Pb | Ni | Si | Sn | Zn | |
| Min/Max | 3.0 - 4.0 | 0.15 | Rem | 0.15 | 0.05 | 0.15 | 0.7 - 1.3 | 0.2 | 0.5 |
| Nominals | 3.5000 | - | 95.5000 | - | - | - | 1.0000 | - | - |
Temper
| Product Type | Temper Type |
| Information not available on website |
Mechanical Properties
| Temper | Sect. Size | Cold Work | Type Min | Temp | Tensile Strength | YS 0.05% UL |
YS 0.02% Offset |
YS 0.005% Offset |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Shear Strgth |
Fatigue Strgth |
Izod Impact Strgth |
| - | in. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| O61 | 0 | 68 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| O61 | 0 | 0 | TYP | 20 | 414 | - | - | - | 64 | - | - | - | - | - | - | - | - | - | 0 |
| H01 | 0 | 68 | 74 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H01 | 0 | 0 | TYP | 20 | 510 | - | - | - | 31 | - | - | - | - | - | - | - | - | - | 0 |
| WIRE | |||||||||||||||||||
| H00 | 0.42 | 68 | 68 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H00 | 10.7 | 7 | TYP | 20 | 469 | - | - | - | 52 | 71 | - | - | - | - | - | - | - | - | 0 |
| O61 | 0.39 | 68 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| O61 | 10 | 0 | TYP | 20 | 414 | - | - | - | 67 | - | - | - | - | - | - | - | - | - | 0 |
| H01 | 0.49 | 68 | 84 | - | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H01 | 12.4 | 21 | TYP | 20 | 579 | - | - | - | 29 | 84 | - | - | - | - | - | - | - | - | 0 |
Physical Properties
| Product Property | US Customary | Metric |
| Coefficient of Thermal Expansion | 9.4 · 10-6 per oF (68-572 F) | 16.9 · 10-6 per oC (20-300 C) |
| Density | 0.301 lb/in3 at 68 F | 8.33 gm/cm3 @ 20 C |
| Electrical Conductivity | 12 %IACS @ 68 F | 0.07 MegaSiemens/cm @ 20 C |
| Electrical Resistivity | 86.4 ohms-cmil/ft @ 68 F | 14.36 microhm-cm @ 20 C |
| Melting Point - Liquidus | 1890 F | 1032 C |
| Modulas of Elasticity in Tension | 16000 ksi | 110000 MPa |
| Specific Gravity | 8.33 | 8.33 |
| Thermal Conductivity | 33.0 Btu · ft/(hr · ft2 · oF) at 68F | 57.1 W/m · oK at 20 C |
Fabrication
| Joining Technique | Suitability |
| Brazing | Not Recommended |
| Butt Weld | Fair |
| Capacity for Being Cold Worked | Excellent |
| Capacity for Being Hot Formed | Fair |
| Coated Metal Arc Welding | Fair |
| Gas Shielded Arc Welding | Fair |
| Machinability Rating | 40 |
| Oxyacetylene Welding | Not Recommended |
| Seam Weld | Fair |
| Soldering | Not Recommended |
| Spot Weld | Fair |
Our Services
40+ years of experience
Aviva Metals Houston warehouse operation is a AS9120B, and AS9100D in our Ohio foundry, based on ISO 9001:2015. We are now also offering our complete range of brass, bronze and copper alloys in precision machined or milled parts, in full accordance with your drawings. Aviva Metals creates custom precision bearings and bushings, flanges, washers, double flange bearings, full half bearings, spacers and special machined parts that can be shipped on a global basis and in full accordance with most international standards.
