Typical Uses for C62500
- Industrial: Guide Bushings, Wear Strips, Cams, Dies, Forming Rolls, Sheet Metal Forming Dies, Wing Dies for Vertical Tube Benders, Bushings, Wear Plates for Plastic Molds, Welding Rod, Plastic Mold Components
Product Specifications
| Other | |
| ROD | M30 |
Chemical Composition
| Cu | Al | Fe | Mn | |
| Min./Max. | Rem. | 12.5-13.5 | 3.5-5.5 | 2.0 |
| Nominal | 82.7 | 13.0 | 4.3 | - |
Mechanical Properties
| Temper | Sect. Size | Cold Work | Type Min | Temp | Tensile Strength | YS 0.05% UL |
YS 0.02% Offset |
YS 0.005% Offset |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Shear Strgth |
Fatigue Strgth |
Izod Impact Strgth |
| - | in. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| Bar | |||||||||||||||||||
| M30 | 0.0 | 0 | TYP | 68 | 100 | 55 | - | - | 1 | 29 | - | - | - | - | - | - | 60 | 67 | 0.0 |
| 0.0 | 20 | 689 | 379 | - | - | 1 | 29 | - | - | - | - | - | - | 414 | 462 | 0.0 | |||
| Rod | |||||||||||||||||||
| M30 | 0.0 | 0 | TYP | 68 | 100 | 55 | - | - | 1 | 29 | - | - | - | - | - | - | 60 | 67 | 0.0 |
| 0.0 | 20 | 689 | 379 | - | - | 1 | 29 | - | - | - | - | - | - | 414 | 462 | 0.0 |
Physical Properties
| Product Property | US Customary | Metric |
| Melting Point - Liquidus | 1925 F | 1052 C |
| Melting Point - Solidus | 1917 F | 1047 C |
| Density | 0.260 lb/in3 at 68 F | 7.2 gm/cm3 @ 20 C |
| Specific Gravity | 7.210 | 7.21 |
| Electrical Resistivity | 104 ohms-cmil/ft @ 68 F | 17.29 microhm-cm @ 20 C |
| Electrical Conductivity | 10 %IACS @ 68 F | 0.059 MegaSiemens/cm @ 20 C |
| Thermal Conductivity | 27 Btu · ft/(hr · ft2 · oF)at 68F | 46.7 W/m · oK at 20 C |
| Coefficient of Thermal Expansion | 9 · 10-6 per oF (68-572 F) | 16.2 · 10-6 per oC (20-300 C) |
| Specific Heat Capacity | 0.090 Btu/lb/oF at 68 F | 377.1 J/kg · oK at 293 K |
| Modulas of Elasticity in Tension | 16000 ksi | 110000 MPa |
Our Services
40+ years of experience
Aviva Metals Houston warehouse operation is a AS9120B, and AS9100D in our Ohio foundry, based on ISO 9001:2015. We are now also offering our complete range of brass, bronze and copper alloys in precision machined or milled parts, in full accordance with your drawings. Aviva Metals creates custom precision bearings and bushings, flanges, washers, double flange bearings, full half bearings, spacers and special machined parts that can be shipped on a global basis and in full accordance with most international standards.
