| EN | EN equivalent CuZn38Pb2 - CW606N |
Sheet/Plate
Profile
Typical Uses for C35300 High Leaded Brass "62%"
- Builders Hardware: Drawer Pulls, Hinges, Drawer Handles
- Consumer: Bicycle Spoke Nipples, Clock and Watch Parts, Clock Plates and Nuts, Key Blanks
- Industrial: Ratchets, Instrument Backs, Automatic Screw Machine Parts, Valve Stems, Pinions, Flare Fittings, Couplings, Bearing Cages, Channel Plate, Wheels, Gears, Adapters
- Fasteners: Nuts, Rivets, Screws
- Other: Engravers Plate
- Plumbing: Faucet Seats, Faucet Stems, Pipe Fittings, Plumbers Fittings, Plumbers' Brass Goods
Product Specifications
| End Product | Specification |
| Bar | ASTM B121 |
| Plate | ASTM B121 |
| Sheet | ASTM B121 |
| Strip | ASTM B121 |
| Rod | ASTM B453 |
Chemical Composition
| Cu | Fe | Pb | Zn | |
| Min | 60.0 | - | 1.5 | |
| Max | 63.0 | 0.15 | 2.5 | Rem |
Mechanical Properties
| Temper | Sect. Size | Cold Work | Type Min | Temp | Tensile Strength | YS 0.05% UL |
YS 0.02% Offset |
YS 0.005% Offset |
Elong. | RH B |
RH C |
RH F |
RH 30T |
VH 500 |
BH 500 |
BH 3000 |
Shear Strgth |
Fatigue Strgth |
Izod Impact Strgth |
| - | in. | % | - | F | ksi | ksi | ksi | ksi | % | B | C | F | 30T | 500 | 500 | 3000 | ksi | ksi | ft-lb |
| - | mm. | - | - | C | MPa | MPa | MPa | MPa | - | - | - | - | - | - | - | - | MPa | MPa | J |
| FLAT PRODUCTS | |||||||||||||||||||
| H02 | 0.04 | 68 | 70 | 50 | - | - | - | - | - | - | - | - | - | - | 44 | - | |||
| H02 | 1 | 0 | TYP | 20 | 483 | 345 | - | - | 10 | 75 | - | - | 67 | - | - | - | 303 | - | 0 |
| O60 | 0.04 | 68 | 54 | 21 | - | - | - | - | - | - | - | - | - | - | 40 | - | |||
| O60 | 1 | 0 | TYP | 20 | 372 | 145 | - | - | 45 | - | - | 80 | 46 | - | - | - | 276 | - | 0 |
| M20 | 0.04 | 68 | 54 | 21 | - | - | - | - | - | - | - | - | - | - | 40 | - | |||
| M20 | 1 | 0 | TYP | 20 | 372 | 145 | - | - | 45 | - | - | 85 | 49 | - | - | - | 276 | - | 0 |
| H00 | 0.04 | 68 | 60 | 35 | - | - | - | - | - | - | - | - | - | - | 42 | - | |||
| H00 | 1 | 0 | TYP | 20 | 414 | 241 | - | - | 30 | 55 | - | - | 54 | - | - | - | 290 | - | 0 |
| ROD | |||||||||||||||||||
| H01 | 1 | 68 | 72 | 50 | - | - | - | - | - | - | - | - | - | - | 45 | - | |||
| H01 | 25.4 | 0 | TYP | 20 | 496 | 345 | - | - | 25 | 78 | - | - | - | - | - | - | 310 | - | 0 |
| M30 | 1 | 68 | 52 | 20 | - | - | - | - | - | - | - | - | - | - | 39 | - | |||
| M30 | 25.4 | 0 | TYP | 20 | 359 | 138 | - | - | 52 | - | - | 78 | - | - | - | - | 269 | - | 0 |
| O60 | 1 | 68 | 54 | 21 | - | - | - | - | - | - | - | - | - | - | 40 | - | |||
| O60 | 25.4 | 0 | TYP | 20 | 372 | 145 | - | - | 50 | - | - | 80 | - | - | - | - | 276 | - | 0 |
| TUBE | |||||||||||||||||||
| H04 | 0 | 68 | 74 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| H04 | 0 | 30 | TYP | 20 | 510 | 379 | - | - | 10 | 80 | - | - | - | - | - | - | - | - | 0 |
| O50 | 0 | 68 | 56 | 23 | - | - | - | - | - | - | - | - | - | - | - | - | |||
| O50 | 0 | 0 | TYP | 20 | 386 | 159 | - | - | 50 | - | - | 82 | 47 | - | - | - | - | - | 0 |
Physical Properties
| Product Property | US Customary | Metric |
| Coefficient of Thermal Expansion | 11.6 ·10-6 per oF (68-572 F) | 20.9 · 10-6 per oC (20-300 C) |
| Density | 0.303 lb/in3 @ 68 F | 8.39 gm/cm3 @ 20 C |
| Electrical Conductivity | 28 %IACS @ 68 F | 0.164 MegaSiemens/cm @ 20 C |
| Electrical Resistivity | 37.0 ohms-cmil/ft @ 68 F | 6.15 microhm-cm @ 20 C |
| Melting Point Liquid US | 1660 F | 904 C |
| Melting Point Solid US | 1650 F | 899 C |
| Modulas of Elasticity in Tension | 15000 ksi | 103400 MPa |
| Modulas of Rigidity | 5600 ksi | 38610 MPa |
| Specific Gravity | 8.39 | 8.39 |
| Specific Heat Capacity | 0.09 Btu/lb/oF @ 68 F | 377.1 J/kg · oK at 293 K |
| Thermal Conductivity | 71.0 Btu · ft/(hr · ft2 · oF) @ 68 F | 1229.9 W/m · oK at 20 C |
Fabrication
| Joining Technique | Suitability |
| Brazing | Excellent |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Fair |
| Capacity for Being Hot Formed | Excellent |
| Coated Metal Arc Welding | Not Recommended |
| Forgeability Rating | 90 |
| Gas Sheilded Arc Welding | Fair |
| Machinability rating | 40 |
| Oxyacetylene Welding | Good |
| Seam Weld | Not Recommended |
| Soldering | Excellent |
| Spot Weld | Good |
Our Services
40+ years of experience
Aviva Metals Houston warehouse operation is a AS9120B, and AS9100D in our Ohio foundry, based on ISO 9001:2015. We are now also offering our complete range of brass, bronze and copper alloys in precision machined or milled parts, in full accordance with your drawings. Aviva Metals creates custom precision bearings and bushings, flanges, washers, double flange bearings, full half bearings, spacers and special machined parts that can be shipped on a global basis and in full accordance with most international standards.
