Electronic & Digital Alloys
Specialty alloys for connectors
Aviva Metals has brought together a range of alloys, specifically for electronic and digital applications, so as to provide you with one source to turn to for your ongoing requirements.View PDF
This alloy is a free-cutting bronze alloy developed for the manufacture of connectors, primarily in the electronics industry. This highly machinable alloy must meet several requirements such as high strength, high electrical conductivity, and excellent corrosion resistance.
This material contains lower lead and less impurities than C36000 Free Machining Brass. This alloy has excellent thread rolling and knurling capability. In addition to outstanding free machining properties, C35300 is typically used in components where severe cold working is required.
This alloy is the most versatile and commonly used brass alloy bar stock used in both the North and South American Markets. It is used excessively to make a huge variety of screw machine products. It’s 100% machinability stems from a favorable interaction between the material’s basic structure and three percent lead. The result is an alloy with good engineering properties and the ability to be machined at an extremely low cost.
This alloy is a cold worked bronze which possess a higher yield strength, good memory and fatigue corrosion resistance. C51000 Phosphor bronze can be readily brazed or soldered. Capacity for being cold worked is good.
C54400, is the finest bearing alloy that the industry has to offer. It is an extremely machinable alloy that is equaled by few in the wrought metal industry as a bearing alloy. This alloy has good mechanical properties and excellent corrosion resistance.
Aviva Model 3, Ruby Red Brass, a Free Machining D.Z.R. (Dezincification-Resistant) “Lead Free” Brass has patents pending for North America and has already received patents in several European and Asian countries. We have been involved with R&D on this Free Machining and “true” D.Z.R. Lead Free Brass alternative, and now we have the solution that we believe is far superior to any other lead free brass being offered anywhere in the world!
Aviva Model 3, Ruby Red Brass, Free Machining D.Z.R. “Lead Free” Brass proves to meet manufacturer’s expectations in numerous ways inclusive of the fact that it is readily and easily recyclable, as it will not contaminate leaded brasses. Aviva Model 3, Ruby Red Brass, Free Machining D.Z.R. “Lead Free” Brass has excellent machinability, 90% min (when compared to C360 Brass), and has mechanical properties similar to traditional free cutting brasses. It also has outstanding conductivity 37% IACS min (45% higher than C360 Brass) and does not contain Silicon, Bismuth, or Arsenic. It has excellent cold working abilities, thread rolls very well and can be electroplated like copper.